Choosing Replacement UPVC Window Handles
It is essential to select the right replacement in case your uPVC handle is damaged or worn. This will help ensure the security of your home.
There are a variety of aspects to take into consideration when selecting a new handle for double-glazed windows. It is important to first determine the type of handle you have.
Cockspur handle
When the handle on your uPVC window breaks, it is usually easy to replace it with a new one. The most crucial part of this process is determining what type of handle and lock you have to ensure that you find a replacement that will fit properly. You should also weigh the spindle of the old handle to determine what size you need.
Espag handles are the most common uPVC handles. They have a central spindle that slots into your window's locking mechanism. This handle can be found on both modern and older uPVC Windows. To install a new Espag handle you will need to remove the handle that is currently in use by removing grub screws, and possibly pins, depending on the type of handle you have.
Another type of uPVC window handle is the Cockspur handle, which has a nose that is closed onto a wedge-shaped block in the frame of the window. This handle is usually found on older uPVC window frames and is less secure than the Espag handle. When replacing the handle of a Cockspur handle, you must be aware of the height of the step to make sure that the replacement is of the correct size.
The second kind of uPVC handle is the inline Espagnolette handle, which has a straight design that can be used on both windows that tilt and turn. The most commonly used handle that is in this design is the "Espag" model that has a 38mm gap between the centres and can be used on tilt and turn windows or as an internal door handle. The Espag handle comes in a variety of nib and height options for various applications. Some Espag handles come with an internal locking mechanism that will add security to your home. This is an excellent option for homeowners looking to add security to their windows but do not want to invest in a multi-point lock. The lock mechanism in the Espag handle is operated by a shoot bolt rod that is attached to a locking gearbox, which is a secure and reliable option.
Espag handle
The Espag handle, also referred to as the espagnolette window handle, is a crucial part of your double-glazing system that will help secure your home. It is an all-point locking system that features shoot bolt rods and an lock gearbox that provides supreme security. The handle is controlled by a spinning device on the back of the handle. It can be utilized on aluminium, uPVC or timber windows. It is available in a variety of styles. It can be either locking or non-locking, according to your preference.
The handle is usually secured to the frame with pins or screws. Identify these and remove them with either pliers or a screwdriver. Next, locate the spindle on the back of the handle and slide it into the lock mechanism in the window. Once the handle is in place, you can screw the handle into the frame. Replace any screws or pins removed from the previous handle.
It is crucial to precisely measure the spindle and determine the handle type when replacing the handle. This will help you select the correct replacement handle. If your new handle is tilt and turn, you will have to ensure that the spindle of the handle is long enough to work the tilt and turning mechanisms.
You can easily replace uPVC window handles yourself once you have the appropriate tools and a thorough understanding of the type. Just make sure to take your time and take care to be safe when working with windows and tools. Test the window handle before you secure it. This can be done by removing and opening the window repeatedly. If it is difficult to open and close the window, this may indicate that it requires further tightening. Additionally, you must look for signs of wear and tear which can cause the handle to break. By following these suggestions, you can easily replace your uPVC window handles and enhance the security of your home.
Tilt and Turn Handle
When a uPVC window handle is damaged or not working properly, it can be replaced in a few simple steps. It is crucial to determine the type of handle, and measure the spindle size. Different handles come in various sizes. Using the correct tools and taking your time can simplify the task. Additionally, it's crucial to remember to make sure you are safe when working with windows and tools.
The identification of the type of handle is done by taking a look at the base of the handle. There is usually a screw or pin in the base that binds the handle to the frame. If it's missing it could mean that the handle has split from the base and needs to be replaced. It is also important to note that the handle has to be specifically designed for the type of window it is fitting to. This is especially crucial as various handles are designed for windows with awning or casement windows, and there are usually variations between the different types of handles.
To replace a uPVC window handle, first take out the handle that was previously in the window. Then look for screws either above or below the handle, and use a screwdriver to take them out. If there are no screws, make use of your fingers to take the handle from the window. After removing the handle, make sure whether the screws or pins are secure and tight. Then, you can replace the handle and screw it in place. Once the handle is secured it is a good idea to put the screw caps back into place and test the handle to ensure that it's functioning properly.
It is essential to select the appropriate replacement upvc handles for your window. It's also a good idea to choose the handle that is in line with your window's colour. This will give your room a more modern look and improve its overall appearance. In addition, it's recommended to purchase an item that can be locked to be secured when the window is shut.
Crank handle
uPVC Windows can become worn out over time. They offer insulation and security for your home. The handle mechanism, which is used to open and close the window can also break, which requires replacement. Fortunately anyone with the right tools can replace the worn out uPVC handles. Before you attempt to replace the window handle or lock, it is important to know the model you own.
Make sure that the new UPVC handle is fitted with the correct spindle. This is the part of the handle that connects the locking mechanism to the frame of the window. You can measure this by removing the existing handle and measuring it from its base to its tip. The handle's spindle should be the same length as the screw or pin holding it to the window.
Take the handle off by removing its plastic oval. Take off the square metal bar that slots into handle's internal square drive. The screws that hold the handle to the window's frame will be exposed. These can be removed with an flat-head screwdriver. Once these are removed then you can replace the cockspur wedge block and grub screw and then insert the handle.
It is possible that the handle is loose because of the handle not being aligned properly. The window handle is held by a screw or pin that is inserted into the handle. Then, you could check here is fixed with another screw or pin in the front of the handle. The screw will be hidden when the window is in the closed position and is only accessible by opening the handle.
After installing the new UPVC window handle, it is crucial to tighten the screws to prevent them from loosing over time. It is also crucial to check the window handle and lock for signs of wear and lubricate them regularly. Keeping your windows and handles in good shape will ensure they function efficiently and look beautiful for many years to come.